Comfast Cf-Wu810n Wifi Driver UPDATED
CLICK HERE >> https://shurll.com/2ttNhc
How to Install Comfast Cf-Wu810n Wifi Driver on Your Computer
Comfast Cf-Wu810n is a wireless USB adapter that can provide fast and stable internet connection for your computer. It supports 802.11n standard and can reach up to 150Mbps speed. It is compatible with Windows, Mac, Linux and Raspberry Pi operating systems. However, you may need to install the driver manually for some of them. Here is a guide on how to do that.
Windows
If you are using Windows XP, 7, 8, 8.1 or 10, you can download the driver from the official website of Comfast: http://en.comfast.com.cn/index.phpm=content&c=index&a=show&catid=30&id=220. Choose the driver that matches your operating system and unzip the file. Then, plug in the adapter to your computer and run the setup.exe file. Follow the instructions on the screen to complete the installation.
Mac
If you are using Mac OS X, you can also download the driver from the same website as above. Choose the driver for Mac and unzip the file. Then, open the folder and double-click on the Install.pkg file. Follow the instructions on the screen to complete the installation.
Linux
If you are using Linux, you may need to install the driver from the source code. The adapter uses the Realtek 8188EUS chipset, which is supported by the rtl8188eu driver. You can download the source code from this GitHub repository: https://github.com/lwfinger/rtl8188eu. To install it, you need to have some tools and dependencies installed on your system, such as make, gcc, linux-headers and dkms. You can use your package manager to install them. For example, on Ubuntu, you can run this command:
sudo apt-get install make gcc linux-headers-$(uname -r) dkms
Then, navigate to the folder where you downloaded or cloned the source code and run these commands:
make
sudo make install
sudo modprobe 8188eu
This will compile and install the driver and load it into the kernel. You should be able to see your adapter in the network manager and connect to a wifi network.
Raspberry Pi
If you are using Raspberry Pi with Raspbian OS, you may need to install a firmware package for your adapter. You can do this by running this command:
sudo apt-get install firmware-realtek
This will install the firmware files for various Realtek chipsets, including 8188EUS. You may need to reboot your Pi for the changes to take effect. You should be able to see your adapter in the network manager and connect to a wifi network.
Conclusion
Comfast Cf-Wu810n is a versatile and affordable wireless USB adapter that can work with different operating systems. However, you may need to install the driver manually for some of them. This article has shown you how to do that for Windows, Mac, Linux and Raspberry Pi. If you have any questions or problems, you can contact Comfast customer service or visit their online shops for more information. 248dff8e21